Ford Explorer Tire Pressure Sensor Fault

ford explorer tire pressure sensor fault

If you drive a Ford Explorer, then you may have noticed that your car isn’t always getting the right amount of gas. That is because your tire pressure sensor might be malfunctioning. This article will help you diagnose and fix this problem.

TPMS error codes

You should have your Ford Explorer’s tire pressure system checked at least once a month. The system monitors the air pressure inside your tire and gives you real-time information.

There are three main reasons why a vehicle’s TPMS system may not be functioning correctly. These are sensors failing to perform, battery dying, or an electrical interference.

When you have a problem with your TPMS, it’s important to get it fixed right away. Symptoms of a malfunction include a tire pressure light that’s not turning off or a low or high warning light that keeps coming on.

Tire pressure monitoring systems work by sending information about the pressure of your tires to your onboard computer. It is important to check the pressure in your tires before embarking on a long road trip. Underinflated tires may wear out prematurely and reduce fuel economy.

If the TPMS warning light doesn’t go off after you have inflated your tires, you may have a problem with your tire pressure sensor. Luckily, it’s easy to fix. First, you need to replace the batteries in your tire pressure sensor.

Diagnosing the problem

If your Ford Explorer tire pressure sensor has malfunctioned, you will need to find the cause of the problem. Your vehicle may have a faulty sensor, or the system could have lost communication with the tires. The fault message on the dashboard will indicate a problem with the TPMS system.

In most cases, you will need to have your TPMS sensors reprogrammed. This process can be done in a local auto repair shop or by an authorized dealership.

Tire pressure sensors are a modern car feature. They give the driver real-time information about the pressure in their tires. When a tire is low, it will compress the diameter of the wheel, which will result in slower acceleration.

Most Ford models will have a warning light that appears when a tire is under inflated. It should also be noted that a faulty tire pressure sensor can lead to an error code that can be displayed on the dashboard.

Tire pressure sensors are programmable and can be reset. These are usually affixed to the valve stem.

Repairing the problem

If you are experiencing a tire pressure sensor fault on your Ford Explorer, there are several things you should know. The most important is that the problem could be caused by a faulty sensor. Another issue could be a loose connection. It is also possible that the tire pressure monitoring system (TPMS) might not be functioning correctly.

Getting the TPMS working is relatively easy. Just bring the car in to a dealership and have them reset the TPMS. They may even have a TPMS tool to use.

This is a relatively new feature in modern cars, and some cars even don’t have them. However, it is not a bad idea to have them if you have a warranty. Having the right amount of air pressure in your tires can help you get better fuel economy and longer-lasting tires.

Aside from letting you know when your tires are too low, a tire pressure sensor also tells you when your tire has been repaired. You can also have your Ford Explorer repaired if it has been underinflated. Underinflated tires are a big safety concern.

Disposing of the sensor

If you are having problems with your Ford Explorer tire pressure sensor, there are several options for you. One option is to have it fixed. Another option is to simply reset the sensor.

To reset the sensor, you will need to remove the valve stem from the wheel. You will then need to pull the TPMS sensor straight down. Once the sensor is removed, you will need to inspect it for damage.

After this, you will need to disconnect the TPMS sensor from the valve stem. This is done by using a T10 Torx. Before you can start working on the TPMS sensor, you will need to release the brake pedal.

Resetting the sensor is a simple process. Once the warning is gone, you will need to check the pressure of your tires. If the reading is low, you will need to add air. The pressure should be checked first thing in the morning.

After a few miles of driving, you will see the warning disappear. If the warning continues, you will need to get the sensor replaced. A new sensor will cost around $150 at a local Ford dealer.