The TPMS (Tire Pressure Monitoring System) light will turn on when one or more of your tires has low air pressure. Usually, the warning goes away after you add air to your tire(s).
However, sometimes the TPMS light will stay on even though you have properly inflated your tires. If this happens, you should try to reset the sensor.
1. Check the Pressure
A common reason that your tire pressure monitoring system lights up is because of low air pressure. This is easy to fix, simply inflate your tires with air. If the light remains on after you have done this, check your owner’s manual for specific instructions about resetting the sensor. The process is generally the same for all Jeep vehicles, though the specifics can vary a bit from model to model.
If your tires are at the proper pressure, but the warning still illuminates, there may be a problem with one of the sensors. This happens occasionally, especially in cold weather when the air pressure dips a little. However, this doesn’t necessarily mean that the tires need to be replaced. Rather, the sensor could just be having some issues with its battery.
The TPMS sensors are attached to the valve stems inside your tires and use radio waves to communicate with the vehicle’s computer. If they get interfered with by other electronics (such as a tinted window), or jammed by foreign objects like dirt, snow, or ice, the TPMS will trigger an error message on the dashboard.
Another issue that can cause this warning to come on is a sensor that was broken when you had new tires installed or changed the air pressure in them. This is actually pretty common, as TPMS sensors can be easily damaged during this process. Luckily, this is an easy fix for your Chandler Jeep.
Finally, the TPMS sensors can sometimes be disrupted by a faulty fuse in your vehicle’s electrical system. This is also fairly common, as the fuses in your vehicle are designed to protect sensitive electronic components from damage caused by excess voltage or current.
The best way to avoid these problems is to regularly check the air pressure in your tires, and to make sure that they are at the recommended level. This will not only help keep your tires safe and comfortable, but it will also improve your gas mileage and allow your tires to last longer. If you’re not comfortable checking the pressure in your own tires, take them to a mechanic or dealership service center. They will be able to help you reset your TPMS and get rid of that pesky warning light!
2. Press the Reset Button
The TPMS sensors have a battery that needs to be replaced from time to time. If the sensor’s battery dies, it will trigger the tire pressure light to start flashing. This is a good reason to bring your Jeep in for service at Vande Hey Brantmeier near Appleton, so one of our expert auto techs can inspect the sensor and replace it, if necessary.
There are also times where the TPMS indicator will not turn off even though you have the correct tire pressure in your tires. This can happen if the tire pressure sensor was not properly calibrated during installation. You will need to use a TPMS relearn tool to reprogram the sensor IDs into your Jeep Wrangler’s computer. The process can take between ten and fifteen minutes. It can be done at a Jeep dealership or a tire shop.
To do this, first make sure your car is completely cool. Next, turn the ignition to the “On” position but don’t start the engine. Find the TPMS reset button, which is usually located beneath the steering wheel. Hold the button down for three seconds and then release it. Wait for 20 minutes before starting the vehicle again. This gives the system time to reset itself.
If you are still having trouble getting your tire pressure sensor to reset, there are a few other things you can try. You can inflate each tire 3 pounds over the recommended amount, then deflate them to their recommended PSI. You can also pop the hood and disconnect the battery cable for three seconds to discharge any excess power that may be keeping your sensor from resetting.
You can also try using a fix-a-flat aerosol can to air up the tire. Once you have the tire back up to the proper pressure, you can use the reset button to get it to turn off. You can also take your Jeep in to one of our service centers, and we will be happy to look at the TPMS sensors and reset them for you. Whatever you choose to do, it is always best to consult your owner’s manual for specific instructions tailored to your model of vehicle.
3. Drive for 20 Minutes
The tire pressure sensors in your Jeep Wrangler use radio waves to communicate with the vehicle’s computer. Sometimes, these signals are blocked by things like tinted windows, snow or rain. This can cause the sensors to reset, which will turn on your tire pressure monitoring system light. If this happens, it’s important to follow the steps below to reset your TPMS.
The easiest way to reset the TPMS on your Jeep is to drive around for 20 minutes at speeds over 50 mph. This will allow the sensor to refresh and reset itself. It’s a good idea to do this after changing the air pressure in your tires, installing new tires or replacing an existing one. If you don’t want to drive your Jeep for 20 miles, you can also use a TPMS relearn tool to reset the sensors. This tool will program new tire pressure sensor IDs into your vehicle’s computer, allowing the sensors to accurately monitor the air pressure in your Jeep’s tires.
You can find the TPMS reset button in various places depending on your model of Jeep, but it’s typically located under the steering wheel or in the owner’s manual. Once you’ve found it, turn the key to the “On” position but don’t start your car. Hold down the TPMS reset button until the tire pressure sensor lights flash three times, then release it. Start your car and let it run for 20 minutes, which will give the sensors enough time to refresh.
If you’re not a do-it-yourselfer, the team at Boggus Tipton Chrysler Dodge Jeep Ram is happy to perform this service for you. Our trained technicians will make sure the job is done right, and they’ll also help you with any other service your vehicle needs around Brownsville.
We hope you’ve found this guide helpful, and that it will allow you to reset the TPMS on your Jeep Wrangler. We’re always here to offer more tips and tricks for your vehicle, so don’t hesitate to contact us if you have any questions or need any additional assistance.
4. Restart the Engine
Sometimes, even after you’ve double-checked that your tires are inflated to the proper pressure, and your TPMS light still won’t go off, it might be time to reset it. But before you do, make sure that the TPMS sensor itself is not damaged or miscalibrated. If it is, you may need to take your Jeep to a service center or tire shop to have it replaced or re-calibrated.
The first step in resetting your Jeep’s TPMS is to turn off the engine, then locate the TPMS reset button, which is usually located on the steering wheel or near the dashboard. The exact location of this button will vary by vehicle; consult your owner’s manual if you can’t find it. With the car turned off, press and hold the reset button until the TPMS light blinks three times, then release the button and drive for about 20 minutes. This should reset the sensor and clear up the warning light.
If you’re unable to get your TPMS light to reset, it may be necessary to replace the TPMS sensor altogether. This is a complicated process, and it’s best to leave it to the professionals if possible. If you’re having trouble with your Jeep’s TPMS sensor, we recommend visiting our service center in Winterhaven to have it replaced. Our experienced team of technicians will be happy to help!
The TPMS system in your Jeep is designed to warn you when one or more of the tires is low on air pressure. If you have topped off your tires, pressed the TPMS reset button, driven for 20 minutes, and your TPMS light is still on, it’s time to call our service center at Boggus Tipton Chrysler Dodge Jeep Ram. We’ll be able to diagnose the problem and determine if your TPMS sensor is simply malfunctioning or needs to be replaced. Our expert service technicians will be able to get you back on the road in no time!
No Responses