If you’re having trouble driving your car due to a tire pressure sensor fault, you may be wondering how to fix it yourself. Although this can be a fairly simple repair, it does require some extra gear and expenses. If you can’t fix it yourself, take your car to a repair shop for assistance. Just be sure to avoid shady repair shops! Read on to learn more about how to fix the tire pressure sensor fault.
Error codes
Having problems with your 2010 Ford F150’s tire pressure sensor? Here are some possible causes and repair steps. First, check the tire pressure with a gauge and make sure that the pressure is within the manufacturer’s recommended range. If the tire pressure is low, try to re-set the TPMS system by pressing the brake pedal and then releasing it. Most sensor faults can be corrected by re-setting the TPMS sensors.
The warning light on your Ford F150 may be indicating a sensor fault. It has been on for six months and has come on 30 times. The dealer has checked your tire pressures and reset the computer but cannot find the problem. If the error code still remains on the screen, you should visit a Ford dealership for repair. They may be able to offer you a solution. This is a common problem and a relatively easy one to fix.
Causes
If you’ve recently noticed a warning light flashing on your dash, you should have your tires checked by a professional. To identify whether the sensor is the culprit, you can purchase an air pressure gauge at a local parts store or at most gas stations. Once you have verified the pressure of each tire, you can try reprogramming the sensor. Depending on the cause of your problem, you may have to pay extra to have your car reprogrammed, which can be very expensive.
In some cases, a problem with your car’s TPMS can cause your tire pressure sensor to alarm when the tire is too low. In such cases, you should not drive with the light on. This could be dangerous, but if you’re unsure of what caused it to turn on, you can try to reset the system. If this doesn’t solve your problem, take your vehicle to a Ford dealership.
Remedy
If you want to save money and do the work yourself, you can easily remedy the 2010 Ford F150 tire pressure sensor fault. The process will require some gear and expense. If you don’t have these resources, you can take it to a repair shop. Be careful to choose a reliable shop. Listed below are some steps to fix the tire pressure sensor fault. To get started, check the pressure of the number one tire with a gauge. Then, check all of the tires with the same amount of air. Ford recommends 35 psi for the standard tires.
If you still experience the problem after following these steps, you can try to reset the sensor. Using the TPMS Activation Tool, place it on the left front tire sidewall at the valve stem. Press the brake pedal to release the lever and then cycle the ignition switch from the off position to the run position three times. If the problem persists, you can contact your Ford dealer for a repair.
